X8QBE-F
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Xeon Boards   [ X8QBE-F ]

• 5 w/ PCI-E 2.0 4-Way Xeon 7500 ServerBoard

Key Features
1. Intel® Xeon® processor 7500
    series (8-Core) or new gen. Intel®
    Xeon® processors E7-4800 family
    (10-Core), with QPI up to 6.4 GT/s
2. Intel® 7500 (Boxboro-EX) Chipset
3. Up to 1TB DDR3 1333*/1066/800
    MHz ECC Registered DIMM
4. Intel® 82576 Dual-Port Gigabit
    Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller
6. 2 (x16) PCI-E 2.0 or
    1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
    4 (x8) PCI-E 2.0 slots
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN

 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
OS Compatibility
Product SKUs
MBD-X8QBE-F -O
  • X8QBE-F (Standard Retail Pack)
MBD-X8QBE-F -B
  • X8QBE-F (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 16.4" x 16.79" (41.66cm x 42.65cm)
 
Processor/Cache
CPU
  • Quad 1567-pin LGA Sockets
  • Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
  • Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 32x 240-pin DIMM slots
  • Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory
  • Memory Mirroring supported
Memory Type
  • 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage
  • 1.5 V, 1.35V**
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 7500 (Boxboro-EX) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HB chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 3x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers (3 ports)
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Chassis ( Optimized for X8QBE-F )
1U Chassis
  • CSE-818A-1400LPB

  • (rev. K required, Air Shroud MCP-310-81804-0B)
2U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • Total of 10 fan headers supporting up to 10 fans
  • Ten 4-pin fan headers
  • 10x fans with tachometer status monitoring
  • Support 4-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List
  Part Number Qty Description
X8QBE-F MBD-X8QBE-F-O 1 X8QBE-F Motherboard
I/O shield MCP-260-00036-0N 1 Standard Size I/O shield for X8QB6-F and X8QBE-F
Optional Parts List
  Part Number Qty Description
Cable CBL-0420L - 27" BBU extension to Broadcom iBBU07

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.

* Run at speed - 1066MHz
** Please check Tested Memory List for compatibility; 32GB or 1.35V memory requires rev 2.0 or above boards with Millbrook II
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.