 |
 |
MBD-X6DAi-G-O |
- X6DAi-G (Standard Retail Pack)
|
MBD-X6DAi-G-B |
|
|
 |
Form Factor |
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
|
 |
CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
System Bus |
|
Operating System Software |
|
|
 |
Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
Memory Type |
- DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
- Memory Sparing / Mirroring
|
|
 |
Chipset |
- Intel® E7525 chipset
- MCH + 6300ESB + 82541PI
|
SATA |
- Intel® 6300ESB (Hance Rapids) SATA Controller on-chip
(2x Drive support)
- Two SATA ports
- SATA - RAID 0, 1, and JBOD Supported (for 2 HDD)
|
Network Controllers |
- 1x Intel® 82541PI Single-port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
- AC'97 audio CODEC with high quality 6-channel sound
|
|
 |
Serial ATA |
- Two SATA ports
- Supports up to two SATA drives
|
IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
USB |
- Up to 4 USB ports
- 2x USB 2.0 / 1.5 Compliant Ports
- 2x USB Internal Headers
|
Serial Ports |
- 2 Fast UART 16550 serial ports
|
Parallel Port |
- 1 ECP / EEP parallel port
|
Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
|
 |
 |
 |
2U Chassis |
|
Tower / 4U Rackmount |
|
Important Chassis Notes |
- To ensure system stability, a 450W (minimum) ATX power supply [4-pin (+12V), 8-pin +12V AND (20 or 24-pin)] is required.
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
|
 |
PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x8) signal on a (x16) slot
|
PCI-X |
- 2x 64-bit 66MHz PCI-X (3.3V) slots
|
PCI |
- 2x 32-bit 33MHz PCI (5V) slots
|
|
 |
BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|
 |
Software |
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
 |
Voltage |
- Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
|
FAN |
- Total of eight 4-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
LED |
- CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
- Power Fail LED
- HDD LED
- Power LED
- NIC LED
- Fan Fail LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|