 |  | | MBD-P8SGA-V-O | - P8SGA-V (Standard Retail Pack)
| | MBD-P8SGA-V-B | | | |  |  | | Form Factor | | | Dimensions | - 11.5" x 9.6", (29.2cm x 24.4cm)
| | |  | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® 4 processor (800MHz FSB) or
- Supports an Intel® Celeron® processor with 256KB L2 Cache (533MHz FSB)
- Hyper-Threading (HT) enabled
| | System Bus | | | |  | | Memory Capacity | - Four 184-pin DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR400/333MHz memory (Dual Channel Memory Bus)
| | Memory Type | - DDR400/333MHz unbuffered, non-ECC SDRAM, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 128 MB, 256 MB, 512 MB, 1 GB
| | Memory Voltage | | | |  | | Chipset | - Intel 915G-V (Grantsdale) chipset
- ICH6 + FWH + Intel® 82541PI
| | Serial ATA | - Intel® ICH6 SATA controller built-in
| | Network Controllers | - Single-port Intel® 82541PI Gigabit Ethernet Controller
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| | Graphics | - On-chip third generation integrated gfx graphics core
| | Audio | - AC'97 audio CODEC with high quality 6-channel sound
| | Super I/O | | | Clock Generator | - ICS954141DF chip
- (Over-Clock Enable)
| | |  | | Serial ATA | - Four Serial ATA ports
- Four SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | Infrared | | | LAN | | | USB | - 6x USB 2.0 / 1.1 rear ports
- 1x USB 2.0 / 1.1 header for 2x ports
| | VGA | | | Audio | - 1x Line In / Line Out / Microphone ports
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | Parallel Port | - 1x ECP / EEP Parallel Port
| |  |  |  | | Important Note | - To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
| | |  | | PCI-Express | | | PCI | - 3x 32-bit 33MHz PCI (5V) slots
| | |  | | BIOS Type | - 4Mb Flash EEPROM with AwardBIOS®
- 49LF004B/SST
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- ACPI 1.0 (limited)
- BIOS rescue hot keys
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
| | |  | | Software | | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Suspend to RAM (STR)
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | |  | | CPU | - Monitors for CPU Cores (+3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - Total of three proprietary fan headers
- Total of three 4-pin fan headers
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
| | LED | - +5V standby voltage alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |