 |
 |
SKU |
|
|
 |
 |
Form Factor |
 |
Extended ATX |
 |
Dimensions |
 |
12.05" x 13", (30.6 x 33.0cm) |
 |
 |
 |
CPU |
 |
Dual FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor up to 1.0GHz |
 |
System Bus |
 |
133MHz/100MHz system bus |
 |
 |
 |
Memory Capacity |
 |
Four 168-pin DIMM sockets Supports up to 4 GB of PC133/100 memory |
 |
Memory Type |
 |
PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs Dual channel memory bus Memory must be populated in pairs |
 |
DIMM Sizes |
 |
64 MB, 128 MB, 256 MB, 512 MB, 1 GB |
 |
Memory Voltage |
 |
3.3 V only |
 |
 |
 |
Chipset |
 |
Serverworks Serverset III HE-SL chipset
NB-HE-SL + OSB4 + CIOB2 |
 |
SCSI |
 |
Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI |
 |
Network Controllers |
 |
1x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, RJ45 output |
 |
 |
 |
AGP |
 |
2x AGP Pro slot
|
 |
PCI Expansion |
 |
2x 64-bit 66/33MHz PCI (3.3V) slots
4x 64-bit 33MHz PCI (5V) slots
|
 |
IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA/33
|
 |
USB |
 |
Up to 2 USB ports |
 |
Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
Parallel Port |
 |
1 ECP / EEP Parallel Port |
 |
Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
|
 |
 |
 |
Rackmount Tower / 4U |
 |
SC840 |
 |
Important Note |
 |
To ensure system stability, a 250W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |
 |
 |
 |
BIOS Type |
 |
4Mb Flash EEPROM with AMI® BIOS |
 |
BIOS Features |
 |
Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support |
 |
 |
 |
Software |
 |
SuperDoctor® III Watch Dog |
 |
Power Configurations |
 |
ACPI/APM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Wake-On-Ring (WOR) header Power-on mode control for AC power loss recovery Internal/External modem remote ring-on |
 |
 |
 |
Voltage |
 |
Monitors for CPU Cores,
+3.3V, +5V, ±12V
CPU Core auto-switching voltage regulator with
auto-sense from 1.3V-1.5V
Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
FAN |
 |
Total of six 3-pin fan headers 4x fans with tachometer monitoring Status monitor with firmware/software on/off control |
 |
Temperature |
 |
Monitoring for CPU, chassis, environment |
 |
LED |
 |
CPU Overheat LED System Overheat LED Suspend-state indicator LED |
 |
Other Features |
 |
Chassis intrusion detection Chassis intrusion header |
 |
|