P4DSE
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ P4DSE ]

Key Features
1. Dual Intel® Xeon® up to 3.0 GHz
2. Serverworks™ GC-SL Chipset
3. Up to 4GB DDR 200 SDRAM
4. 1x Intel® 82550 10/100 Ethernet Controllers
5. 3 x 64-bit PCI-X expansion slots
6. ATI RageXL 8MB PCI Graphic Controller

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKU - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
SKU
  • P4DSE
 
Physical Stats
Form Factor Extended ATX
Dimensions 12" x 11.7" (30.5cm x 29.7cm)
Processor/Cache
CPU • Dual mPGA603 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz
System Bus 400MHz system bus
System Memory
Memory Capacity • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR200 memory
• Dual channel memory bus
• Memory must be populated in pairs
Memory Type DDR266/200 registered ECC SDRAM 72-bit ECC, 184-pin gold-plated DIMMs
DIMM Sizes 128 MB, 256 MB, 512 MB, 1 GB
Memory Voltage 2.5 V only
On-Board Devices
Chipset Serverworks™ GC-SL Chipset
Network Controllers • 1x Intel® 82550 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, RJ45 output
Graphics ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Input / Output
PCI Expansion • 3x 64-bit 100/66MHz PCI-X (3.3V) slot
• 3x 32-bit 33MHz PCI (5V) slots
IDE • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB Up to 4 USB ports
Serial Ports 2 Fast UART 16550 serial ports
Parallel Port 1 ECP / EEP parallel port
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Keyboard / Mouse PS/2 keyboard and mouse ports
Chassis ( Optimized for P4DSE )
2U Chassis SC822i-400RC
Rackmount Tower / 4U SC742i-420
Important Note To ensure system stability, a 400W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required.
System BIOS
BIOS Type 4Mb Flash EEPROM with AMI® BIOS
BIOS Features • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
Management
Software SuperDoctor® III
• Watch Dog
Power Configurations • ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• CPU Fan auto-off in sleep mode
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
PC Health Monitoring
Voltage • Monitors for CPU Cores, +2.5V, +3.3V, +5V, ±12V
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS)
FAN • Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control
Temperature • Monitoring for CPU, chassis, environment
• CPU thermal trip support
LED • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED
Other Features • Chassis intrusion detection
• Chassis intrusion header
Standard Retail Package
Part Number Qty Description
P4DSE MBD-P4DSE-O 1 P4DSE Motherboard
Manual(s) MNL-0664 1 Motherboard Manual for P4DSE
Retention Kits SKT-095E 2 Xeon Heatsink Retention with Enhanced Clip
Fans FAN-042CF 2 Pentium® 4, Xeon, Active Heat Sink with Copper fin
I/O Cables CBL-010
CBL-022
CBL-031
CBL-036
1
1
1
1
9-pin Serial Port Cable
ATX Floppy Cable
One Head USB Cable with Bracket
ATA 66/100 IDE LP Cable
Driver Disk CDR-SWKS 1 Version 1.0 CD
I/O Shield CSE-PT2 1 I/O Shield 3200-1A

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.