 |
|
 |
| MBD-X6DLP-4G2-O |
- X6DLP-4G2 (Standard Retail Pack)
|
| MBD-X6DLP-4G2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12.05" x 9.6" (30.6cm x 24.4cm)
|
| |
|
|
| CPU |
- Dual 479-pin FC-mPGA4 Sockets
- Dual-Core 32-bit Xeon Processor LV (Low Voltage / Low Power) CPUs (31W) up to 2.5GHz
- (2x1MB) L2 Integrated Advanced Transfer Cache
|
| System Bus |
|
| Operating System Software |
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + 82573V/L
|
| SATA |
- 6300ESB SATA Controller (2x Drive support)
- 2x SATA Ports
- SATA HostRAID 0, 1 support
|
| SCSI |
- Adaptec AIC-7901 SCSI Controller
- Single-Channel Ultra320 SCSI
- Support for SCSI HostRAID 0, 1, 10
|
| SCSI Zero-Channel RAID |
- RAID 0, 1, 5 support
- Support for Zero-Channel RAID
- Optional: (Card not included)
|
| IPMI |
|
| Network Controllers |
- Intel® 82573V and 82573L Single Port Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB support
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB internal headers for 2 ports
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 header
|
| Parallel Port |
- 1 ECP / EEP parallel port header
|
|
|
|
|
|
| 1U |
- SC811LF-260 (low-speed, power-saving low-noise fan)
- SC512LF-260 (low-speed, power-saving low-noise fan)
- SC813MT-300C
|
| Important Chassis Notes |
- To ensure system stability, a 200W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-Express |
|
| PCI-X |
- 1 Universal Slot [1 (x8) PCI-e or 1x 66MHz PCI-X]
- 1x 64-bit 66MHz PCI-X (3.3V) slot
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slot
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| Voltage |
- Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.2V-1.3V
|
| FAN |
- Total of six 4-pin fan headers
- 6 fans with status tachometer monitoring
- Status monitor with firmware/software on/off control
- Support both 4-pin and 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
