| | SYS-5013C-MT | - SuperServer 5013C-MT (Beige)
| SYS-5013C-MTB | - SuperServer 5013C-MTB (Black)
| | | CPU | | Single mPGA478 ZIF Sockets Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition) Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz Hyper-threading enabled | | System Bus | | 800 / 533 / 400MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM sockets Supports up to 4 GB of DDR400/333/266 memory Dual channel memory bus Memory must be populated in pairs | | Memory Type | | DDR400/333/266 unbuffered ECC or non-ECC SDRAM, 184-pin gold-plated DIMMs | | DIMM Sizes | | 128MB, 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Intel® E7210 (Canterwood ES) chipset MCH + 6300ESB + FWH | | Serial ATA | | Marvell® SATA Controller chip (4x Drive support) Six Serial ATA ports RAID 0, 10 Supported (for 4 HDD) RAID 0, 1 Supported (for 2 HDD) | | Network Controllers | | 1x Intel® 82547GI CSA Gigabit Ethernet Controller 1x Intel® 82541 Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8MB of video memory | | | | 1x full-height, half-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot | | | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | Floppy | | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | USB | | 2x USB 2.0 / 1.1 ports 1x USB header supports additional 2x USB 2.0 / 1.1 ports) | | Serial Ports | | 2x Fast UART 16550 serial ports | | VGA Port | | 1x VGA Port | | Parallel Port | | 1x ECP/EEP Parallel Port | | LAN Port | | 2x RJ45 Ports | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | Height | | 1.7" (43mm) | | Width | | 17.2" (437mm) | | Depth | | 19.8" (503mm) | | Gross Weight | | 38 lbs (17.2 kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | | Ports | | 2x Front USB Ports 1x Serial COM Port | | | | Hot-swap | | 4x 3.5" Hot-swap SATA drive bays | | | | CDROM | | 1x 24x TEAC CDROM Drive | | | | 1x SATA813 1U Backplane w/o SAF-TE | | | | Fans | | 3x 4cm 12,500 RPM Fan | | | | Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] | AC Voltage | - 100 - 240V, 60-50Hz, 5 Amp
| DC Output | | +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | | Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of five 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED +5V standby alert LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | | | BIOS Type | | 4Mb Flash EEPROM with AwardBIOS® | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.3 support PCI 2.3 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | |