| | SYS-5013C-T | - SuperServer 5013C-T (Beige)
| SYS-5013C-TB | - SuperServer 5013C-TB (Black)
| | | CPU | | Single mPGA478 ZIF Sockets Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition) Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.4GHz Hyper-threading enabled | | System Bus | | 800 / 533 / 400MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM sockets Supports up to 4 GB of DDR400/333/266 memory Dual channel memory bus Memory must be populated in pairs | | Memory Type | | DDR400/333/266 ECC, non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs | | DIMM Sizes | | 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Intel® E7210 (Canterwood ES) chipset MCH + ICH5R + FWH | | Serial ATA | | SATA Controller on-chip (Intel® ICH5R) Dual Serial ATA ports RAID 0, 1 Supported | | Network Controllers | | Dual Intel® 82541 Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | 1x full-height, full-length 32-bit 33MHz PCI expansion slot (Riser card required) | | | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 8 USB ports | | Infrared | | 1 Infrared port header | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP/EEP Parallel Port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | BIOS Type | | 4Mb Flash EEPROM with AwardBIOS® | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.3 support PCI 2.3 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | | | | | Height | | 1.7" (43mm) | | Width | | 16.8" (426mm) | | Depth | | 22.6" (574mm) | | Gross Weight | | 34 lbs (15.4 kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | | Ports | | none | | | | Hot-swap | | 2x 3.5"SATA Hot-swap drive bays
| | | | 1x 1U 2-Port SATA Backplane w/o SAF-TE | | | | 250W AC power supply [ 24-pin ] | | AC Voltage | | 100 - 240V, 47-63Hz, 4 Amp | | DC Output | | 12V + 5V + 3.3V ≤ 230W | | +5V | | 25.0 amp | | +5V standby | | 2.0 amp | | +12V | | 13.0amp | | -12V | | 0.8 amp | | +3.3V | | 20.0 amp | | | | CPU | | Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of four 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED +5V standby alert LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |