 |  | | SYS-5013S-i | - SuperServer 5013S-i (Beige)
| | SYS-5013S-iB | - SuperServer 5013S-iB (Black)
|  |  | | CPU |  | Single mPGA604 ZIF Socket Supports one Intel® Xeon® processor with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz |  | | System Bus |  | 533MHz/400MHz system bus |  |  |  | | Memory Capacity |  | Four 184-pin DIMM sockets Supports up to 4 GB DDR266/200 memory |  | | Memory Type |  | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |  | | DIMM Sizes |  | 128MB, 256 MB, 512 MB, 1 GB |  | | Memory Voltage |  | 2.5 V only |  |  |  | | Chipset |  | Serverworks GC-SL Chipset |  | | Network Controllers |  | 1x Broadcom 5702 Gigabit Ethernet 1x Intel® 82551 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |  | | Graphics |  | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |  |  |  | | 1x full-height, full-length 64-bit 33MHz PCI expansion slot (Riser card required) |  |  |  | | IDE |  | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |  | | USB |  | Up to 4 USB ports |  | | Serial Ports |  | 2 Fast UART 16550 serial ports |  | | Parallel Port |  | 1 ECP/EEP parallel port |  | | Floppy |  | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |  | | Keyboard / Mouse |  | PS/2 keyboard and mouse ports |  |  |  | | BIOS Type |  | 4Mb Flash EEPROM with AMI® BIOS |  | | BIOS Features |  | Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection |  | |  |  |  | | Form Factor |  | 1U Rackmount |  | | Model |  | SC810 |  |  |  | | Height |  | 1.7" (43mm) |  | | Width |  | 16.8" (426mm) |  | | Depth |  | 22.6" (574mm) |  | | Gross Weight |  | 34 lbs (15.4 kg) |  | | Available Colors |  | Beige, Black |  |  |  | | Buttons |  | Power On/Off button System Reset button |  | | LEDs |  | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |  |  |  | | Internal Bay |  | 2x 3.5" Internal Drive Bays |  |  |  | | Thermal control 250W AC power supply [ 24-pin ] |  | | AC Voltage |  | 100 - 240V, 47-63Hz, 4 Amp |  | | DC Output |  | 5V + 3.3V ≤ 230W 12V + 5V + 3.3V ≤ 250W |  | | +5V |  | 25.0 amp |  | | +5V standby |  | 2.0 amp |  | | -5V |  | 0.3 amp |  | | +12V |  | 13.0amp |  | | -12V |  | 0.8 amp |  | | +3.3V |  | 20.0 amp |  |  |  | | CPU |  | Monitors for CPU Cores, +2.5V, +3.3V, +5V, ±12V CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via Dip Switch) |  | | FAN |  | Total of five 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |  | | Temperature |  | Monitoring for CPU, chassis, environment CPU thermal trip support |  | | LED |  | CPU Overheat LED System Overheat LED Suspend-state indicator LED |  | | Other Features |  | Chassis intrusion detection Chassis intrusion header |  | |