| | SYS-5014C-T | - SuperServer 5014C-T (Beige)
| SYS-5014C-TB | - SuperServer 5014C-TB (Black)
| | | CPU | - Single LGA775 (Prescott) ZIF Socket
- Supports an Intel® Pentium® 4 processor 6xx sequence on 90nm process ONLY (800MHz FSB) or
- Supports an Intel® Celeron® processor with 256KB L2 cache (533MHz FSB)
- Hyper-Threading (HT) enabled
| System Bus | | | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 4 GB DDR2 400 / 533MHz unbuffered ECC memory
- Dual channel memory bus
- Memory must be populated in pairs
| Memory Type | - DDR2 400 / 533MHz unbuffered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256MB, 512MB, 1GB
- Unbuffered ECC / non-ECC DDR2
- Total 256MB to 4GB memory
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | - Intel E7221 (Copper River) chipset
- ICH6R + FWH + BCM5721
| Serial ATA | - Intel® ICH6R SATA controller
- RAID 0, 1, JBOD support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
| Network Controllers | - 2x Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 10/100/1000BASE-T, RJ45 output
| Graphics | - Onboard integrated server quality graphics in MCH
| Super I/O | | | | PCI-Express / PCI-X | - 1x 64-bit PCI-X 133MHz slot
| | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, and ATA/100
| Infrared | | LAN | | USB | - 2x USB 2.0 / 1.1 ports
- 4x USB 2.0 / 1.1 header for 4x ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial ports
- 1x serial header
| Parallel Port | | | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| Ports | | | | Hot-swap | - 2x 3.5"SATA Hot-swap drive bays
| | | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | 1x 1U Serial ATA backplane | | | Fans | - 2x 10cm 4200 RPM blower fans
| | | Thermal control 260W AC power supply with PFC [ 24-pin, 4-pin=12V, (2) 4-pin ] | AC Voltage | - 100 - 240V, 60-50Hz, 4 Amp Max
| DC Output | | +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
- CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 0.8375V-1.6000V
| FAN | - Total of five 3-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware/software speed control
- Support 3-pin fans
| Temperature | - Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal control for 5x fan connectors
- I2C temperature sensing logic
| LED | - CPU / System Overheat LED
- +5V standby alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | BIOS Type | - 8Mb Flash EEPROM with AwardBIOS®
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
| |