 | |
 | | SYS-5015M-T+ | - SuperServer 5015M-T+B(Beige)
| | SYS-5015M-T+B | - SuperServer 5015M-T+B (Black)
| | | | | CPU | - Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| | Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | | |
| | Chipset | - Intel 3000 (Mukilteo-2) chipset
- ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
| | Serial ATA | - Intel® ICH7R SATA controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | | | Network Controllers | - 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output
| | VGA | - On-board ATI ES1000 16MB graphics
| | Super I/O | | | Clock Generator | | | | |
| | Universal Slot | - 1x 64-bit PCI-X 133MHz Slot (via Riser Card) OR
- 1 (x8) PCI-Express Slot (via Riser Card) - Optional
| | | |
| | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- White Connector for Compact Flash (CF, 40-pin IDE connector) card only
| | LAN | | | USB | - Up to 6x USB 2.0 compliant / 1.1 compatible ports
- 4x Internal USB headers
- 2x Rear USB ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
| | Parallel Port | - 1x ECP / EEP Parallel Header
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | | | | |
| | Hot-swap | - 2x 3.5"SATA Hot-swap drive bays
| | | |
| | Fans | - 3x 3-pin Counter-rotatign Cooling Fans
| | | |
| Fixed 300W AC power supply module with PFC
[ 24-pin, (4-pin=12V), 4-pin HDD ] | | AC Voltage | - 100 - 240V, 60-50Hz, 5 Amp
| | DC Output | | | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
| | FAN | - Fan Speed Control
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- SMBIOS 2.3
| |
