 | |
 | | SYS-5016I-MT | - SuperServer 5016I-MT (Black)
| | | | | CPU | - LGA 1156 Socket
- Intel® Xeon® X3400 series
- Intel® Xeon® L3400 series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
| | | | | Memory Capacity | - 6x 240-pin DDR3 DIMM sockets
- Supports up to 48 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets
- Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets
- 1333 / 1066 / 800 MHz
- Dual Core processors of Ci3 and Pentium: support ECC UDIMM only
- Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements
| | Memory Type | - 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - 6x SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | Network Controllers | - 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | | | Super I/O | | | Clock Generator | | | | | | PCI-Express | | | | | | Serial ATA | - 4 SATA hard drives supported
| | LAN | | | USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header (4 ports)
- Total 8 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
| | | | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | - 2x Front USB Ports
- 1x Serial COM Port
| | | |
| | Hot-swap | - 4x 3.5" SAS / SATA Hot-swap drive bays
| | | |
| | Fans | | | | |
| | 280W AC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50 - 60Hz, 5Amp
| | +5V | | | +5V standby | | | +12V | - 23Amp @ 100-140V, 27Amp @ 180-240V
| | -12V | | | +3.3V | | | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | |
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
