 | |
 | | SYS-6014P-32R | - SuperServer 6014P-32R (Beige)
| | SYS-6014P-32RB | - SuperServer 6014P-32RB (Black)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | | | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| | SAS | - Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
| | SAS Zero Channel RAID | - Support for Zero-Channel RAID
- Optional Card Not Included
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- (Optional IPMI Card: AOC-1UIPMI-B)
- 3rd LAN(GbE) port (Optional: AOC-1UIPMI-LANG) *Must be used with Optional IPMI Card above.
| | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | |
| | PCI-Express / PCI-X | - 1 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot] - 1 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot] - 1 x IPMI 2.0 Slot (For optional 3rd LAN)
- Supports Full-length add-on cards
| | | |
| | SAS | - Four internal SAS ports
- Four external SAS ports
| | IDE | - Dual EIDE channels support up to four UDMA/ IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | | | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
| | Ports | | | | |
| | Hot-swap | - 4x 3.5" Hot-swap SAS / SATA drive bays
| | | |
| | Floppy | | | DVD-ROM | | | | |
| | 1x 1U SAS / SATA Hard Drive Backplane | | | |
| | Fans | | | | |
| | 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby & VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense
| | FAN | - Total of five proprietary fan connectors supporting 10 fans
- 10x fans with Tachometer status monitoring
- Status monitor for speed control
| | Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 10x fan connectors
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC support
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
| |
