 | |
 | | SYS-6015W-NTRB | - SuperServer 6015W-NTRB (Black)
| | SYS-6015W-NTRV | - SuperServer 6015W-NTRV (Silver)
| | | | | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | | System Bus | - 1600 / 1333 / 1066 MHz system bus
| | | | | Memory Capacity | - Eight 240-pin DIMM slots
- Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
| | Memory Type | - 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® 5400 (Seaburg) chipset
- MCH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
| | Network Controllers | - Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 32 MB of video memory
| | Super I/O | | | Clock Generator | | | | | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off Button
- System Reset Button
- UID Button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Universal Information (UID) LED
| | Ports | - 2x USB & DB9 COM port tray (Optional)
| | | | | Left Slot | | | Right Slot | - 1 (x8) PCI-E 2.0 Slot (Low profile size w/ 5.5" length)
| | | |
| | Hot-swap | - 4x 3.5"SATA Hot-swap drive trays
| | | |
| | DVD-ROM | - Slim 8x DVD, 24x CD, DVD-ROM drive
| | | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) | | | |
| | Fans | - 4x Cooling Fans
- 2x Optional cooling fans for add-on cards
| | Shroud | | | | |
| | 650W (1 + 1) Redundant AC-DC power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 8-4 Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
| | | | | BIOS Type | - 16Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
