SuperServer 5017P-TLN4F

Integrated Board

Key Features

1. Embedded 3rd Gen. Intel® Core
i7-3612QE Mobile ECC processor
(up to 3.1GHz, 6M Cache)

2. Intel® QM77 Chipset

3. 2x 3.5" or 4x 2.5" internal SATA2 *
Hard drive bays (optional)

4. 1x PCI-E 3.0 x16 slot**

5. Up to 16GB ECC DDR3 1066/1333MHz
on 2x SO-DIMMs

6. Intel® 82574L; 4x GbE LAN ports

7. IPMI 2.0 on Dedicated LAN port

8. 200W Low-noise power supply w/ PFC

9. Disk-on-module (DOM) power
connector


	Drivers & Utilities BIOS IPMI Tested Memory Manuals OS Certification Matrix Quick-References Guide Drive Options


Processor/Cache

CPU	Embedded 3rd Gen. Intel® Core i7-3612QE Mobile ECC processor (up to 3.1GHz, 6M Cache)


System Memory

Memory Capacity	2x 204-pin DDR3 SODIMM slots Supports up to 16 GB DDR3 ECC memory
Memory Type	1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel® QM77 Chipset
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® 82574L Gigabit Ethernet controllers 4x Gigabit LAN ports Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics	Intel Integrated Graphics HD 4000 or Matrox G200eW to VGA via BIOS setup


Input / Output

SATA	2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps)
LAN	4x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 ports (via header) 6x USB 2.0 ports (4 rear, 2 via header)
VGA	1x VGA port
Serial Port / Header	2x COM ports (1 rear, 1 header)


Dimensions

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	9.8" (249mm)
Weight	Net Weight: 8 lbs (3.62 kg) Gross Weight: 12 lbs (5.44 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED


Drive Bays

HDD	2x 3.5" or 4x 2.5" internal SATA2 hard drive bays (optional) *


Power Supply

200W Low Noise AC-DC power supply with PFC
AC Voltage	100 - 240V, 50-60Hz, 2.6 Amp Max
+5V	8.0 Amp (max.)
+5V standby	2.0 Amp (max.)
+12V	16 Amp (max.)
-12V	0.5 Amp (max.)
+3.3V	8.0 Amp (max.)
Certification	Gold Certified


System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

* 1x 3.5" or 2x 2.5" SATA2 with riser card
** Add-on card compatibility dependent on number of drives/brackets installed + height of card components

Terms & Conditions \| Privacy \| Investor Relations \| Jobs \| Site Map
SuperServer® \| Motherboard \| Chassis \| Rack Cabinet \| SuperBlade® \| Embedded \| Networking \| Storage \| Accessories \| AMD Solution \| Power Supplies
	Copyright © 2019 Super Micro Computer, Inc.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Products Systems 1U [ 5017P-TLN4F ]