| | SYS-5025M-URV | - SuperServer 5025M-URV (Silver)
| SYS-5025M-URB | - SuperServer 5025M-URB (Black)
| | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Xeon® 3200 Series quad-core processor
- Supports an Intel® Xeon® 3000 Series (Conroe) dual-core processor
- Supports an Intel® Pentium® D dual-core processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® D processor
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
| Serial ATA | - Intel® ICH7R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO+)
- NOTE: Must use Dedicated LAN for IPMI function
| Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| VGA | - On-board ATI ES1000 (16MB) graphics
| Super I/O | | Clock Generator | | | | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - Up to 6x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal header for 4 USB 2.0/1.1 ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
| | | | | Form Factor | | Model | | | | Height | 3.5" (89mm) | Width | 17.2" (437mm) | Depth | 25.5" (648mm) | Gross Weight | 55 lbs (24.9kg) | Available Colors | Silver, Black | | | Buttons | Power On/Off button System Reset button | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED | Ports | 2x USB Ports + DB9 COM Port | | | Left Side | - 1 Universal I/O (UIO) Slot
- 3 (x8) PCI-E Slots (Full-height / Full-length)
| | | Hot-swap | - 8x 3.5"SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
| | | DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive | Floppy | Slim 1.44MB Floppy Drive (Optional) | | | SAS/SATA HDD Backplane (SAS support requires optional SAS controller) | | | Fans | | Shroud | | | | 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | AC Voltage | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| +5V standby | | +12V | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory Voltage, Chipset Voltage
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- UID / Remote UID LED ( IPMI Only )
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |