| | SYS-5025M-i+ | - SuperServer 5025M-i+ (Beige)
| SYS-5025M-i+B | - SuperServer 5025M-i+B (Black)
| | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Xeon® 3200 Series quad-core processor
- Supports an Intel® Xeon® 3000 Series (Conroe) dual-core processor
- Supports an Intel® Pentium® D dual-core processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
| Serial ATA | - Intel® ICH7R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIM1U Slot - Supermicro Intelligement Management
- (Optional: AOC-SIM1U+)
| Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| VGA | - On-board ATI ES1000 (16MB) graphics
| Super I/O | | Clock Generator | | | | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - Up to 4x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 1 internal header for 2 ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
| Parallel Port | - 1x internal header for ECP / EPP parallel port
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
| | | | | Height | 3.5" (89mm) | Width | 16.8" (426mm) | Depth | 25.6" (650mm) | Gross Weight | 55 lbs (24.9kg) | Available Colors | Beige, Black | | | Buttons | Power On/Off button System Reset button | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | | | PCI-Express | - 1 (x4) PCI-e slot
- 1 (x8) PCI-e slot
| PCI - X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | | Internal | 2x Internal 3-Hard Drive carriers (for total of 6 HDD support) | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay | | | Floppy | Panasonic 3.5" 1.44MB Floppy Drive | CD-ROM | Slim 24x CD-ROM Drive | | | Fans | 4x 80mm 6300 RPM fans | | | 550W power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] | AC Voltage | - 100 - 240V, 47-63Hz, 9/3.5 Amp
| DC Output | | +5V | | +5V standby | | -5V | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
| FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
| LED | - CPU / System Overheat LED
- Standby alert LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |