| | SYS-6021-H | - SuperServer 6021H (Beige)
| SYS-6021-HB | - SuperServer 6021HB (Black)
| | | CPU | | Dual FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz | | System Bus | | 133MHz/100MHz system bus | | | | Memory Capacity | | Four 168-pin DIMM 25° sockets Supports up to 4 GB of PC133/100 memory | | Memory Type | | PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs Dual channel memory bus Memory must be populated in pairs | | | Chipset | | Serverworks Serverset III HE-SL chipset NB-HE-SL + CSB5 + CIOB2 | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | SCSI | | Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI | | RAID | | Support for Zero-Channel RAID w/ Adaptec 2005S ZCR Card (Card NOT included) | | Network Controllers | | Dual Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | 2x full-height, full-length 64-bit 66MHz PCI expansion slots (Riser card required) | | | | PCI Expansion | | 1x 64-bit 66/33MHz PCI (3.3V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 2 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | Port header provided; parallel cable required for parallel port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | | | | | Height | | 3.5" (89mm) | | Width | | 16.8" (426mm) | | Depth | | 25.6" (650mm) | | Gross Weight | | 53 lbs (24.0kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED | | Ports | | none | | | | Hot-swap | | 6x 3.5"SCA Ultra320/160 Hot-swap drives | | Peripheral Bay(s) | | 1x 5.25" full-height peripheral bay | | | | 1x 2U SCA Ultra320/160 backplane (without SAF-TE) | | | | Redundant 2U 350W AC power supply w/ PFC | | AC Voltage | | 100 - 240V, 50/60Hz, 6 Amp | | DC Output | | 12V + 5V + 3.3V ≤ 330W | | +5V | | 28.0 amp | | +5V standby | | 2.0 amp | | -5V | | 0.3 amp | | +12V | | 25.0amp | | -12V | | 0.8 amp | | +3.3V | | 30.0 amp | | | | CPU | | Monitors for CPU Cores, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of six 3-pin fan headers 4x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection (through LDCM) Chassis intrusion header | | |