 | |
 | | SYS-6022-P6 | - SuperServer 6022P-6 (Beige)
| | SYS-6022-P6B | - SuperServer 6022P-6B (Black)
| | | | CPU | | • Dual mPGA603 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |  | | System Bus | | 400MHz system bus | | | | | Memory Capacity | | • Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | | | Chipset | | • Intel® E7500 chipset
• MCH + ICH3-S + P64H2 | | | SCSI | | • Adaptec AIC-7899W Controller
• Dual-Channel Ultra160 SCSI | | | RAID | | Support for Zero-Channel RAID w/ Adaptec 2000S ZCR Card (Card NOT included) | | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | | Network Controllers | | • Dual Intel® 82550 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | | 6x low-profile full-length 64-bit PCI-X expansion slots | | | | | PCI Expansion | | • Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
• 2x 64-bit 100/66MHz PCI-X (3.3V) slot
• 4x 64-bit 66MHz PCI-X (3.3V) slots
• 1x VXB (Virtual Extended Bus) slot | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | Up to 5 USB ports | | | Serial Ports | | 2 Fast UART 16550 serial ports | | | Parallel Port | | 1 ECP/EEP parallel port | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with Phoenix® BIOS | | | BIOS Features | | • Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection | | | | | | | Height | | 3.5" (89mm) | | | Width | | 16.8" (426mm) | | | Depth | | 25.6" (650mm) | | | Gross Weight | | 49 lbs (22.3kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED | | | | | Hot-swap | | 6x 3.5"SCA Ultra160 Hot-swap drives | | | Peripheral Bay(s) | | 1x 5.25" full-height peripheral bay | | | | | 1x Single-Channel 2U SCA Ultra160 backplane (w/o SAF-TE) | | | | | 2U 400W AC power supply w/ PFC | | | AC Voltage | | • 100 - 240V, 50/60Hz, 7 Amp | | | DC Output | | &• 12V + 5V + 3.3V ≤ 385W | | | +5V | | 33.0 amp | | | +5V standby | | 2.0 amp | | | -5V | | 0.8 amp | | | +12V | | 25.0amp | | | -12V | | 1.0 amp | | | +3.3V | | 28.0 amp | | | | | CPU | | • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of seven 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support | | |
