 | |
 | | SYS-6023L-8R | - SuperServer 6023L-8R (Beige)
| | SYS-6023L-8RB | - SuperServer 6023L-8RB (Black)
| | | | CPU | | • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 1MB of integrated Advanced Transfer Cache up to 3.20GHz |  | | System Bus | | 533MHz/400MHz system bus | | | | | Memory Capacity | | • Six 184-pin DIMM sockets
• Supports up to 12 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | | | Chipset | | Serverworks™ GC-LE Chipset | | | SCSI | | • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI | | | RAID | | Support for Zero-Channel RAID w/ Supermicro Socket DIMM All-In-One ZCR Card AOC-SOZCR1
(Card not included) | | | Network Controllers | | • Dual Broadcom 5704 Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | | 3x full-height, full-length 64-bit 133/100MHz PCI-X expansion slots (Riser card required) | | | | | PCI Expansion | | • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slots | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | Up to 4 USB ports | | | Serial Ports | | 2 Fast UART 16550 serial ports | | | Parallel Port | | 1 ECP/EEP parallel port | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | | BIOS Features | | • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection | | | | | | | Height | | 3.5" (89mm) | | | Width | | 16.8" (426mm) | | | Depth | | 25.6" (650mm) | | | Gross Weight | | 53 lbs (24.0kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED | | | | | Hot-swap | | 6x 3.5"SCA Ultra320/160 Hot-swap drives | | | Peripheral Bay(s) | | 1x 5.25" full-height peripheral bay | | | | | 1x Single-Channel 2U SCA Ultra320/160 backplane (w/o SAF-TE) | | | | | Redundant 2U 400W AC power supply w/ PFC | | | AC Voltage | | • 100 - 240V, 50/60Hz, 8 Amp | | | DC Output | | • 5V + 3.3V ≤ 200W | | | +5V | | 30.0 amp | | | +5V standby | | 2.0 amp | | | -5V | | 1.0 amp | | | +12V | | 24.0amp | | | -12V | | 0.5 amp | | | +3.3V | | 30.0 amp | | | | | CPU | | • Monitors for CPU Cores, +3.3V, +5, ±12V, 5V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of six 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support | | |
