 |
 |
SYS-6023P-8R |
- SuperServer 6023P-8R (Beige)
|
SYS-6023P-8RB |
- SuperServer 6023P-8RB (Black)
|
 |
 |
CPU |
 |
Dual mPGA604 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 1MB of integrated Advanced Transfer Cache up to 3.20GHz |
 |
System Bus |
 |
533MHz/400MHz system bus |
 |
 |
 |
Memory Capacity |
 |
Eight 184-pin DIMM sockets Supports up to 16 GB DDR266/200 memory Dual channel memory bus Memory must be populated in pairs |
 |
Memory Type |
 |
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
 |
 |
 |
Chipset |
 |
Intel® E7501 chipset MCH + ICH3-S + P64H2 |
 |
SCSI |
 |
Adaptec AIC-7902 Controller Dual-Channel Ultra320 SCSI |
 |
RAID |
 |
Support for Zero-Channel RAID w/ ZCR Card (Card NOT included) |
 |
IPMI |
 |
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
 |
Network Controllers |
 |
Dual Intel® 82546EB Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
 |
Graphics |
 |
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
 |
 |
 |
6x low-profile full-length 64-bit PCI-X expansion slots |
 |
 |
 |
PCI |
 |
Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
3x 64-bit 100/66MHz PCI-X (3.3V) slot
3x 64-bit 66MHz PCI-X (3.3V) slots
1x VXB (Virtual Extended Bus) slot
|
 |
IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
 |
USB |
 |
2 USB ports |
 |
Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
Parallel Port |
 |
1 ECP/EEP parallel port |
 |
Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
 |
 |
BIOS Type |
 |
4Mb Flash EEPROM with Phoenix® BIOS |
 |
BIOS Features |
 |
Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection |
 |
|
 |
 |
 |
Height |
 |
3.5" (89mm) |
 |
Width |
 |
16.8" (426mm) |
 |
Depth |
 |
25.6" (650mm) |
 |
Gross Weight |
 |
49 lbs (22.3kg) |
 |
Available Colors |
 |
Beige, Black |
 |
 |
 |
Buttons |
 |
Power On/Off button
System Reset button
|
 |
LEDs |
 |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power Fail LED
|
 |
 |
 |
Hot-swap |
 |
6x 3.5"SCA Ultra320/160 Hot-swap drives |
 |
Peripheral Bay(s) |
 |
1x 5.25" full-height peripheral bay |
 |
 |
 |
1x Single-Channel 2U SCA Ultra320/160 backplane (w/ SAF-TE) |
 |
 |
 |
Redundant 2U 400W AC power supply w/ PFC |
 |
AC Voltage |
 |
100 - 240V, 50/60Hz, 8 Amp |
 |
DC Output |
 |
5V + 3.3V ≤ 200W |
 |
+5V |
 |
30.0 amp |
 |
+5V standby |
 |
2.0 amp |
 |
-5V |
 |
1.0 amp |
 |
+12V |
 |
24.0amp |
 |
-12V |
 |
0.5 amp |
 |
+3.3V |
 |
30.0 amp |
 |
 |
 |
CPU |
 |
Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
FAN |
 |
Total of seven 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |
 |
Temperature |
 |
Monitoring for CPU, chassis, environment CPU thermal trip support |
 |
LED |
 |
CPU Overheat LED System Overheat LED Suspend-state indicator LED |
 |
Other Features |
 |
Chassis intrusion detection (through LDCM) Chassis intrusion header Chipkill support |
 |
|