 | |
 | | SYS-6024H-32R | - SuperServer 6024H-32R (Beige)
| | SYS-6024H-32RB | - SuperServer 6024H-32RB (Black)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
| | SAS | - Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
| | SATA | - 6300ESB 2-port SATA Controller
| | SAS ZCR | - RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- Optional Card not included
| | IPMI | | | Network Controllers | - Dual Intel® 82541PI Single-Port Gigabit Controller
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | |
| | Serial ATA / SAS | - Two SAS connectors support up to 8 SAS or SATA drives
- Two SATA connectors support 2 SATA drives
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports
- 1 header
| | | | | |
| | Height | 3.5" (89mm) | | Width | 16.8" (426mm) | | Depth | 25.6" (650mm) | | Gross Weight | 51 lbs (23.1kg) | | Available Colors | Beige, Black | | | |
| | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Power Fail LED | | Ports | 2x USB Ports (optional) | | | |
| | PCI-Express | | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | PCI | | | | - (Low-profile Add-on Cards Only)
| | | |
| | Hot-swap | 6x 3.5"SATA Hot-swap drive trays | | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay | | | |
| | Floppy | Panasonic 3.5" 1.44MB Floppy Drive | | | |
| | 1x 2U SAS Backplane (without SESII) | | | |
| | Fans | 4x 80mm 6300 RPM fans
Cooling redundancy with fan shroud | | | |
| 500W (1 + 1) Redundant AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] | | AC Voltage | • 100 - 240V, 50/60Hz, 10 Amp | | DC Output | • 5V + 3.3V ≤ 160W
• 12V Total ≤ 39 Amp | | +5V | 30.0 amp | | +5V standby | 2.0 amp | | +12V1 | 15.0 amp | | +12V2 | 15.0 amp | | +12V3 | 18.0 amp | | -12V | 1.0 amp | | +3.3V | 21.0 amp | | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | |
| | CPU | - Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
| | FAN | - Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |
