| | SYS-6024H-82 | - SuperServer 6024H-82 (Beige)
| SYS-6024H-82B | - SuperServer 6024H-82B (Black)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI
- Host RAID 0, 1, 10, JBOD support
| RAID | - Support for Zero-Channel RAID
- Optional Card not included
| IPMI | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | | | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| LAN | | USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| Parallel Port | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | | | Height | 3.5" (89mm) | Width | 16.8" (426mm) | Depth | 25.6" (650mm) | Gross Weight | 53 lbs (24.0kg) | Available Colors | Beige, Black | | | Buttons | Power On/Off button System Reset button | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | Ports | 2x USB Ports (optional) | | | PCI-Express | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | | Hot-swap | 6x 3.5" SCA Hot-swap drive trays | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay | | | Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
| CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | Single Channel SCSI backplane with SAF-TE | | | Fans | 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud | | | 550W power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] | AC Voltage | - 100 - 240V, 47-63Hz, 9/3.5 Amp
| DC Output | | +5V | | +5V standby | | -5V | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| FAN | - Total of four 4-pin and four 3-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- 4x Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 support
| LED | - CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| |