 | |
 | | SYS-6027PR-HC0R | - SuperServer 6027PR-HC0R (Black)
| | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
(up to 135W TDP *) * Please contact your Supermicro sales representative for additional details | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | | |
| | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Supports up to 1TB DDR3 ECC LRDIMM
- Supports up to 512GB DDR3 ECC Registered memory (RDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SAS | - Broadcom 3008 SAS3 (12Gbps) controller;
RAID 0, 1, 10 support - Note: In order to support the Broadcom RAID Controllers, both CPU socket must be populated
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | | | | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB 2.0 ports total (2x rear)
| | VGA | | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header (internal)
| | Others | - 1x SATADOM support on the motherboard
| | | | |
| | Form Factor | | | Model | | | | |
| | Width | | | Height | | | Depth | | | Weight | - Gross Weight: 90 lbs (40.9kg)
- Net Weight: 72 lbs (32.7 kg)
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| | | | | PCI-Express | - 1x PCI-E 3.0 x16 Low-profile slot
| | 0 Slot | - 1x "0 slot" (x16)
- Compatible Listing
(Both CPUs need to be installed for full access to PCI-E slots) | | | |
| | Hot-swap | - 3x 3.5" Hot-swap SAS/SATA HDD trays
| | | |
| | Fans | - 4x 8cm heavy duty PWM fans with optimal fan speed control
| | | |
| 2000W Redundant Power Supplies with PMBus | | Total Output Power | - 1000W: 100 - 127Vac
- 1800W: 200 - 220Vac
- 1980W: 220 - 230Vac
- 2000W: 230 - 240Vac
- 2000W: 200 - 240Vdc (UL/cUL only)
| Dimension
(W x H x L) | | | Input | - 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
- 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
- 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
| | +12V | - Max: 83.3A / Min: 0A (100-127 Vac)
- Max: 150A / Min: 0A (200-220 Vac)
- Max: 165A / Min: 0A (220-230 Vac)
- Max: 166.7A / Min: 0A (230-240 Vac)
- Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only) | | +5Vsb | | | Output Type | - 27 Pairs Gold Finger Connector
| | Certification |   Titanium Level
[ Test Report ] | | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
