 |
|
 |
| SYS-6028R-TRT |
- SuperServer 6028R-TRT (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 145W TDP)
*
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM:
64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| Serial ATA |
- 8x SATA3 (6Gbps) ports
- 2x SATA3 powered ports that support SATA DOM
|
| LAN |
- 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- Rear USB: 2x USB 3.0 + 2x USB 2.0
- Front USB: 2x USB 2.0
- USB Header: 2x 3.0, 2x 2.0, 1x Type A
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial
- 2x COM Ports (1 rear, 1 header)
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| |
|
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 26" (H) x 11" (W) x 34.5" (D)
|
| Weight |
- Net Weight: 35.5 lbs (16 kg)
- Gross Weight: 69 lbs (31.2 kg)
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| |
|
| PCI-Express |
- 3x PCI-E 3.0 x16 (Low-profile)
- 3x PCI-E 3.0 x8 (Low-profile)
|
| |
|
|
| Hot-swap |
- 8x 3.5" Hot-swap SATA HDD trays
|
| |
|
|
| 2U SAS/SATA backplane |
| |
|
|
| Fans |
- 3x 80x80x38mm Counter-rotating PWM fans
|
| |
|
|
| 740W (1+1) Redundant high-efficiency power supply with PMBus |
| AC Input |
- 100-240 V, 50-60 Hz, 9-3.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 61.7 Amp @ +12V
|
| Certification |
Platinum Certified
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
