 | |
 | | SYS-8027R-7RFT+ | - SuperServer 8027R-7RFT+ (Black)
| | | | | CPU | - Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core)
family (up to 130W CPU at 35°C) - Quad Socket R (LGA 2011)
** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S. | | Cache | | | System Bus | | | | | | Memory Capacity | - 32x 240-pin DDR3 DIMM slots
- Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM slots
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| | SAS | - SAS2 (6Gbps) via Broadcom 2208 controller
- HW RAID 0, 1, 5, 6, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
| | Graphics | - Matrox G200eW (Nuvoton WPCM450 BMC)
| | Super I/O | | | | | | SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | SAS | | | LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
| | USB | | | Video | | | Serial Port / Header | - 1 Fast UART 16550 serial port
| | | | | BIOS Type | - 16MB SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Weight | - Net Weight: 40 lbs (18.1 kg)
- Gross Weight: 66.5 lbs (30.2 kg)
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
| | | |
| | PCI-Express | - 4x PCI-E 3.0 x16 (2 in x8) Low-profile Slots
| | | |
| | Hot-swap | - 6x 3.5" Hot-swap SAS2/SATA3 Drive Bays
| | | |
| | SAS/SATA HDD Backplane | | | |
| | DVD-ROM | - 1x Slim DVD-ROM (Optional)
| | | |
| | Fans | - 3x 8cm Hot-swap Cooling fans
| | Shroud | | | | |
| | Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | | AC Voltage | - 100-240 V, 50-60 Hz, 15 Amp max
| | +12V | - 100 Amp/115 Vac
- 117 Amp/230 Vac
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
| | Certification | 
Platinum Certified | | | | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
| | Other Features | - Chassis intrusion detection
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
