 | |
 | | SYS-7044A-32 | - SuperServer 7044A-32 (Beige)
| | SYS-7044A-32B | - SuperServer 7044A-32B (Black)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Paxville) Dual Core CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | | |
| | Memory Capacity | - Eight 240-pin DIMM slots
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7525 chipset
- MCH + ICH5R + PXH +82546GB
| | SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| | SAS | - Adaptec AIC-9410W Controller
- Host RAID 0, 1, 10
| | ZCR | - Support for Zero-Channel RAID
- Optional Card not included
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 (Optional)
| | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - AC'97 audio CODEC with high quality 6-channel sound
| | Super I/O | | | | |
| | PCI-Express | - 1 (x16) slot
- 1 (x4) using (x16 slot)
| | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | PCI | - 1x 32-bit 33MHz PCI (5V) slot
| | | |
| | Serial Attached SCSI | - Two 4-port SAS connectors
- Up to Eight SATA/SAS hard drives supported
| | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 4x USB rear ports
- 4x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | Parallel Port | | | Audio | - 1 Line-In / Line-Out / Microphone Port
- 6-channel Surround Sound
| | | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | | | | |
| | Height | - Tower: 17.2" (437mm)
Rackmount: 7.0" (178mm) | | Width | - Tower: 7.0" (178mm)
Rackmount: 17.2" (437mm) | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
| | Ports | | | | |
| | Hot-swap | - 8x 3.5"SAS / SATA Hot-swap Drive Bays
| | Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | |
| | SAS / SATA Hard Drive Backplane | | | |
| | Fans | - 4x 5000 RPM Hot-swappable PWM Cooling Fans
- Rear exhaust fans excluded (for optimized Superquiet System)
| | Shroud | | | | |
| 645W Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] | | AC Voltage | - 100 - 240V, 50 - 60Hz, 11 - 5Amp
| | DC Output | | | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V & +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
| | FAN | - Total of eight 4-pin fan headers
- 8 proprietary fan headers
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
- Support 3-pin fans (without speed control)
- Status monitor for on/off control
- Status monitor for speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- I2C temperature sensing logic
| | LED | - System Information LED
- +5V Standby alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- USB Keyboard Support
- RTC (Real Time Clock) Wakeup
| |
