| | SYS-7044H-32R | - SuperServer 7044H-32R (Beige)
| SYS-7044H-32RB | - SuperServer 7044H-32RB (Black)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | Memory Capacity | - Eight 240-pin DIMM slots
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
| SAS | - Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
| SATA | - 6300ESB 2-port SATA Controller
| SAS ZCR | - RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- Optional Card not included
| IPMI | | Network Controllers | - Dual Intel® 82541PI Single-Port Gigabit Controller
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | | | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| LAN | | USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| Parallel Port | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | | | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| Model | | | | Height | - Tower: 17.2" (437mm)
Rackmount: 7.0" (178mm) | Width | - Tower: 7.0" (178mm)
Rackmount: 17.2" (437mm) | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Power Fail LED
- Power Fail LED
| Ports | | | | PCI-Express | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| PCI | | | | Hot-swap | - 8x 3.5"SAS / SATA Hot-swap Drive Bays
| Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | SAS Hard Drive Backplane | | | Fans | - 4x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
| Shroud | - 1x Air Shroud for 1U Chassis
| | | 760W Triple-Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] | AC Voltage | - 100 - 240V, 50-60Hz, 14 Amp Max
| DC Output | | +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
| FAN | - Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |