 | |
 | | SYS-7044H-X8R | - SuperServer 7044H-X8R (Beige)
| | SYS-7044H-X8RB | - SuperServer 7044H-X8RB (Black)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | | | | |
| | Memory Capacity | - Eight 240-pin DIMM slots
- Supports up to 16 GB DDR2-400 memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| | SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI
- Host RAID 0, 1, 10, JBOD support
| | RAID | - Support for Zero-Channel RAID
- Optional Card not included
| | IPMI | | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | |
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| | Model | | | | |
| | Height | - Tower: 17.2" (437mm)
Rackmount: 7.0" (178mm) | | Width | - Tower: 7.0" (178mm)
Rackmount: 17.2" (437mm) | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power Fail LED
| | Ports | | | | |
| | PCI-Express | | | PCI-X | - 3x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | | |
| | Hot-swap | - 8x 3.5"SCA Ultra320/160 Hot-swap Drives
| | Peripheral Bay(s) [90o Rotatable] | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | |
| | Single Channel SCSI Backplane w/ SAF-TE | | | |
| | Fans | - 4x 5000 RPM Hot-swappable Cooling Fans
- 2x 5000 RPM Rear Exhaust Fan
| | | |
| 760W Triple-redundant AC power supply w/ PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] | | AC Voltage | - 100 - 240V, 50/60Hz, 14-8 Amp
| | DC Output | - 5V + 3.3V ≤ 200W
- 12V Total ≤ 50A
| | +5V | | | +5V standby | | | +12V1 | | | +12V2 | | | +12V3 | | | +12V4 | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-0.63V
- Adjustable CPU clock frequency ratio settings (via BIOS)
| | FAN | - Total of four 4-pin and four 3-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 support
| | LED | - CPU Overheat LED
- System Information LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| |
