| | SYS-8044T-8R | - SuperServer 8044T-8R (Beige)
| SYS-8044T-8RB | - SuperServer 8044T-8RB (Black)
| | | CPU | - Quad 604-pin FC-mPGA4 Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 7100 Series with 2MB L2 Integrated Advanced Transfer Cache
| System Bus | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64GB ECC DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs and all be of same type
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR2 400MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E8501 chipset
- MCH + ICH5R + PXH + 82571
| SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
| RAID | - Support for Zero-Channel RAID
- (Card NOT included)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- AOC-IPMI20-E (Included)
| Network Controllers | - Dual Intel® 82571EB Single Port PCI-e Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI ES1000 SVGA PCI video controller with 16 MB of video memory
| Super I/O | | | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
| | | | | Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00) | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| Ports | | | | Hot-swap | - 5x 3.5" Ultra320/160 Hard Drives
- Additional five 3.5" Ultra320/160 Hard Drives available with optional M35 Mobile Rack
| Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bays
| | | PCI-Express | - 1 x8 (in x16) PCI-e slot
- 1 x4 (in x8) PCI-e slot
| PCI-X | - 3x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
| | | U320 SCSI Hard Drive Backplane | | | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
| Shrouds | | | | 1200W (1 + 1) Redundant high-efficiency power supply w/ PFC | 1200W | +5V standby | | +12V | | 900W | +5V standby | | +12V | | With Power Distributor | - +5V: 20 Amp
- +3.3V: 20 Amp
- -12V: 0.6 Amp
| | | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| FAN | - Total of nine 4-pin and four 3-pin fan headers
- 9x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin Fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C Temperature Sensing Logic
- Thermal Monitor 2 support
| LED | | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |