 | |
 | | SYS-8045C-3RB | - SuperServer 8045C-3RB (Black)
| | | |
| | CPU | - Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
- 6-Core Intel® Xeon®
Processor 7400 sequence - Quad-Core Intel® Xeon®
Processor 7300 sequence - Dual-Core Intel® Xeon®
Processor 7200 sequence | | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Quad branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | |
| Chipset | - Intel® 7300 (Clarksboro) chipset
- ESB2
| | SAS | - Broadcom 1068E Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support (Optional RAID 5 w/ AOC-iButton68)
- SGPIO
| | SATA | - Intel ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
| | Network Controllers | - Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 32 MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | | SAS | | | Serial ATA | | | IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Header
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
| | | | |
| | Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00) | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| | Ports | | | | |
| | Hot-swap | - 5x 3.5" SAS / SATA Hard Drives
- Additional three 3.5" SAS/SATA Hard Drives available with optional M35 Mobile Rack
| | Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bays
| | | |
| | PCI-Express | - 1 (x8) PCI-e (using x16)slot
- 1 (x8) PCI-e (using x8) slot
- 1 (x4) PCI-e (using x8) slot
| | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slots
| | | |
| | SAS/SATA Hard Drive Backplane | | | |
| | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
| | Shrouds | | | | |
| | 1200W (1 + 1) Redundant high-efficiency power supply w/ PFC | | 1200W | | +5V standby | | | +12V | | | 900W | | +5V standby | | | +12V | | | With Power Distributor | - +5V: 20 Amp
- +3.3V: 20 Amp
- -12V: 0.6 Amp
| | | |
| | CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - System Information LED
- Suspend-state Indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
