SuperServer 8046B-TRF

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Systems   Tower   [ 8046B-TRF ]





Integrated Board
Super X8QBE-F

Key Features
1. Quad Intel® Xeon® processor 7500
    series (8-Core) or new gen. Intel®
    Xeon® processors E7-4800 family
    (10-Core), with QPI up to 6.4 GT/s
2. Up to 1TB DDR3 ECC Reg. DIMM
3. Auto-switch for: 2 (x16) PCI-E 2.0 or
    1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
    4 (x8) PCI-E 2.0 slots
4. Intel® 82576 Dual-Port Gigabit
    Ethernet Controller
5. 5 Total Hot-swap Drive Bays:
    5x SAS/SATA Drives Support
6. 1400W Gold Level Redundant
    High-efficiency Power Supplies
7. Integrated IPMI 2.0 with Dedicated LAN

Available Colors: Black    

 Drivers & Utilities   BIOS   IPMI   Tested Memory  Manuals   Drive Options 

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
SYS-8046B-TRF
  • SuperServer 8046B-TRF (Black)
 
Motherboard

Super X8QBE-F
 
Processor/Cache
CPU
  • Quad 1567-pin LGA Sockets
  • Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
  • Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 32x 240-pin DIMM sockets
  • Supports up to 1024 GB DDR3 ECC reg. memory at 1066/978/800MHz speed
  • Memory Mirroring supported
Memory Type
  • 1333*/1066/800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 32GB**
Memory Voltage
  • 1.5 V, 1.35V**
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 7500 (Boxboro-EX) chipset
  • ICH10R
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5 support (Windows)
  • RAID 0, 1 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HB chip
 
Input / Output
LAN
  • 3x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers (3 ports)
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • Tower / 4U Rackmountable
  • Optional Rackmount Kit
    (MCP-290-00059-0B)
Model
 
Dimensions
Height
  • 17.8" (452mm)
Width
  • 7.0" (178mm)
Depth
  • 28.4" (721mm)
Weight
  • Net Weight: 65.5 lbs (29.7 kg)
  • Gross Weight: 86.0 lbs (39.0 kg)
Available Colors
  • Black
 
Drive Bays
Hot-swap
  • 5x 3.5" Hard drive bays
  • Additional 5x 3.5" Hard Drives available with optional M35 Mobile Rack
Peripheral Bay(s)
  • 3x 5.25" Peripheral Drive Bay
 
Expansion Slots
PCI-Express
  • Auto-switch for 2 (x16) PCI-E 2.0 or
     1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
     4 (x8) PCI-E 2.0 slots
 
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling
Fans
  • 3x 80mm RPM Hot-Swappable Cooling Fans
  • 3x 80mm RPM Hot-Swappable Rear Exhaust Fan
Shrouds
  • 1x Air Shroud
 
Power Supply
Redundant 1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 6 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN
  • 10x 4-pin fan headers with tachometer status monitoring
  • Low noise fan speed control mode
Temperature
  • Monitoring for CPU and system environment
  • Thermal Control for 10x fan connectors
Other Features
  • Chassis intrusion detection
 
Operating Environment / Compliance
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)


Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8QBE-F
CSE-748TS-R1400BP
1
1
Super X8QBE-F Motherboard
SC748 4U Chassis
Backplane CSE-SAS-M35TQ 1 M35 SAS BACKPLANE W/AMI MG9072
Cable 1 CBL-0044L 5 57.5CM SATA FLAT S-S PBF
Cable 2 CBL-0157L-01 2 8PIN TO 8PIN CABLE FOR SGPIO,615MM,PBF
CD CDR-INTC-Q 1 Driver for Intel quad MBs
Heatsink / Retention SNK-P0045P 4 2U Passive CPU Heatsink for X8QBE/6
Optional Parts List
  Part Number Qty Description
Cable CBL-0420L - 27" BBU extension to Broadcom iBBU07
Mounting Rails MCP-290-00059-0B - 26.5" to 36.4" rail set + handles,
Quick Release for 4U 17.2"W tower
Mobile Rack CSE-M35T-1/CSE-M35TQ - Mobile Rack



* Run at speed - 1066MHz
** Please check Tested Memory List for compatibility; 32GB or 1.35V memory requires rev 2.0 or above boards with Millbrook II
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.