 |
 |
SYS-8047R-7JRFT |
- SuperServer 8047R-7JRFT (Black)
|
|
 |
CPU |
-
Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core) family
- Quad Socket R (LGA 2011)
** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
|
Cache |
|
System Bus |
|
|
 |
Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Supports up to 768GB DDR3 ECC Registered memory (RDIMM)
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
Chipset |
|
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
|
SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
SAS |
- SAS2 via Dual Broadcom 2308
- (IT mode)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T
, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
- Matrox G200 (Nuvoton WPCM450 BMC)
|
Super I/O |
|
|
 |
SAS |
- SAS2 ports (6Gbps) (IT mode)
|
LAN |
- 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
USB |
- 10x USB 2.0 ports total
(4x rear + 4x via header + 2x Type A)
|
Serial Port / Header |
- 2x Fast UART 16550 ports: 1 rear and 1 header
|
|
 |
BIOS Type |
- 16MB SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
 |
 |
Form Factor |
- Tower / 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
|
Model |
|
|
 |
Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 60 lbs (27.2 kg)
- Gross Weight: 100 lbs (45.4 kg)
|
Available Colors |
|
|
 |
Hot-swap |
|
|
 |
PCI-Express |
- 8x PCI-E 3.0 x16 slots
(1x PCI-E 3.0 x8 in x16 slot)
|
|
 |
SAS/SATA HDD Backplane
|
|
 |
Fans |
- 4x 92mm RPM Hot-Swappable Cooling Fans
- 2x 80mm RPM Hot-Swappable Rear Exhaust Fan
|
Shrouds |
- 1x Air Shroud (MCP-310-84805-0B)
|
|
1620W high-efficiency redundant power supply w/ PMBus |
AC Input |
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
|
DC Output |
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
|
Certification |
 Platinum Certified
[ Test Report ]
|
|
 |
CPU |
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
FAN |
- 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
Temperature |
- Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
Other Features |
- Chassis intrusion detection
|
|
 |
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|