 | |
 | | SYS-F627R2-RT+ | - SuperServer F627R2-RT+ (Black)
| | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *) * Please contact your Supermicro sales representative for additional details | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | AHCI SATA | - SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA3 (6Gbps) with RAID 0, 1
| | SCU SATA | - SATA2 (3Gbps) with RAID 0, 1, 10
| | SAS | - SAS2 via Broadcom 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | | | | AHCI SATA | - 2x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
| | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | | | VGA | | | Serial Port / Header | | | | | |
| | Form Factor | | | Model | | | | |
| | Width | | | Height | | | Depth | | | Package | - 28.3" (W) x 15.0" (H) x 42.4" (D)
| | Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power fail LED
| | | | | PCI-Express | | | | |
| | Hot-swap | - 8x 2.5" Hot-swap SAS/SATA HDD Bays + 4x 2.5" Hot-swap SATA HDD Bays
| | | |
| | 1x SAS2 / SATA backplane | | | |
| | Fans | - 2x 8cm 11k RPM middle fans
| | | |
| | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | | AC Input | - 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
| | DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| | Certification |  
Platinum Certified
[ Test Report ] | | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
