 |
 |
SYS-5035B-TB |
- SuperServer 5035B-TB (Black)
|
|
 |
CPU |
- Single LGA775 Socket
- Supports an Intel® Core™2 Extreme QX9000/QX6000 series processor (Exhaust Fan, FAN-0055, is required)
- Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
- Supports an Intel® Core™2 Duo E8000/E7000/E6000/E4000 series processor
- Supports an Intel® Pentium® dual-core E2000 series processor
- Supports an Intel® Celeron® dual-core E1000 series processor
- Supports an Intel® Celeron® 400 series processor
|
System Bus |
- 1333 / 1066 / 800 MHz system bus
|
|
 |
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel)
|
Memory Type |
- DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
Memory Voltage |
|
|
 |
Chipset |
|
Serial ATA |
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
|
Network Controllers |
- 1x Intel® 82566 Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
Audio |
- High Definition 7.1 Channel Audio
|
Super I/O |
|
Clock Generator |
|
|
 |
PCI-Express |
- 2 (x16) PCI-e 2.0 slot
- 1 (x1) PCI-e slot
|
PCI-X |
- 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots
|
PCI |
- 2x 32-bit 33MHz PCI (5V) slots
|
|
 |
Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
|
IDE |
- One EIDE channel supports up to two UDMA IDE devices
- ITE8213F chipset
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- 12x USB 2.0 / 1.1 compatible
- 6 rear + 2 Type A connectors + 2 headers ( 4 ports )
|
Audio |
- High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 2x Fast UART 16550 serial ports
|
Parallel Port |
- 1x ECP / EEP Parallel Port
|
Firewire |
- 1x Firewire IEEE 1394 Port
|
|
 |
BIOS Type |
- 16Mb Flash EEPROM with SPI BIOS®
- Winbond W39V080FAP
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
 |
|
 |
Height |
|
Width |
|
Depth |
|
Weight |
|
Available Colors |
|
|
 |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
|
 |
Hot-swap |
- 4x 3.5" SATA hot-swap drive bays
|
Peripheral Bay |
- 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
|
 |
Floppy |
- Teac Floppy Drive 3.5" 1.44MB (Optional)
|
|
 |
Fans |
- 1x 9.2cm Front Thermal Fan
|
|
 |
4 x 3.5" SATA Backplane |
|
 |
465W AC power supply w/ PFC |
AC Voltage |
- 100 - 240V, 50-60Hz, 6-3 Amp
|
+5V |
|
+5V standby |
|
+12V |
|
-12V |
|
+3.3V |
|
Certification |
Certified
|
|
 |
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
|
FAN |
- Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
|
Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
|
|