Question Does the P6DBE motherboard support 370FCPGA to slot 1 adapters? Also does the motherboard support 133MHz FSB speed processors? Answer We had reports of one adapter that worked in dual processing mode. Most adapters will work in single processor systems, but not dual processing systems. You can use a FSB 133MHz Pentium III processor normally (not supported), but the CPU clock speed will be slower since all Coppermine Pentium III processors have the CPU multiplier locked and do not use external jumpers or BIOS settings. Example a 1000eb which uses a 133 MHz FSB speed will run at 750MHz on a 100MHz FSB speed, reason is the processor is locked at 7.5X and expects a 133MHz bus speed which would give the CPU clock speed of 1GHz. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) 6 P 3 Y FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 1311 N/A 02/18/04 RP     Print Answer