Question
I want to change the FAN settings of IPMI by RAW commands on my X9 motherboard. Can you give me the correct command?
Answer

Using IPMItool or IPMICFG you can use the below command:


"Ipmicfg -raw 0x30 0x45 0x01 0x0#" In place of the # you can use 0, 1 or 2. This will set the fan mode to 0 – standard, 1 – Full, 2 – Optimal.


 To read out the current setting you can use: "Ipmicfg -raw 0x30 0x45 0x00" The output will be 00, 01 or 02, referring to standard, full and optimal respectively.

Was this FAQ helpful?
YES      NO

Enter Comments Below:
Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.



Enter your email address below if you'd like a technical support staff to reply:



Please type what you see:


FAQ Stats
FAQ ID Related Category / Keyword Date Posted Code
18025 Hardware Monitoring:
- IPMI
02/07/14


    Print Answer