Question I purchased a Supermicro 7038A-i + Intel-750 NVMe SSD this year. I can install the Win10 into intel-750, but it seems that the motherboard cannot detect this SSD as a booting device. Is there any solution to it? Answer Please follow below step to enable PCIE NVME EFI support in BIOS, thank you. 1.Press Del enter BIOS>>Advance>>PCIe/PCI/PnP Configuration>>Choose the slot that you installed PCIe NVME SSD>>Change to EFI mode then Save&Exit(F4). 2.Press F11 and please must select UEFI boot device to install your OS ex:”UEFI: DVD-ROMxxxxxxxx” or select your UEFI: USB flash drive at boot menu POST. 3.After finish OS installation, press F11 again, and select proper ”Boot Manager” item to load the OS. 4.Recommend to change boot sequence in BIOS Boot page. Path:BIOS>>Boo>>Boot Option #1. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) T Y D L FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 23782 BIOS: - BIOS Setting 08/25/16     Print Answer