Question I am using an X9DRW-IF motherboard and I have recently updated the IPMI firmware. After rebooting the system, it is stuck in a reboot loop. How can I solve this issue? Answer This is due to using a newer IPMI firmware with an older Bios. The Bios needs to be updated first. Please either disable the IPMI by setting the JPB1 jumper to pins 2-3 and then update the Bios using a bootable USB flash drive, then enable the IPMI be setting the JPB1 jumper to pins 1-2. Or if you have the OOB remote Bios update license, shut down the system and update the Bios using the IPMI remote interface. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) 7 C W K FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 27164 N/A 01/19/18     Print Answer