Question I have an X11SSH, and I am using M.2 NVMe. Trying to install windows server 2016, and it seems that it is installed EUFI, but won't boot to the device. Tried to change what I could from the manual. Answer You can boot, as long as the M.2 is qualified on our list. http://www.supermicro.com/products/motherboard/Xeon/C236_C232/X11SSH-F.cfm?parts=SHOW If you have bios 2.0 and above there will be a menu setting in the bios that you will need to change. To change: Please go to Advanced/ NVMe Firmware Source Select [AMI Native Support]. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) E 3 U P FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 28248 Storage: - M.2-SSD 06/15/18     Print Answer