Question I use Super Micro motherboard X6DHT-G and 2 HDD plug onto Marvel SATA 0 and SATA 1 build as RAID 0 and bootable. 1) Boot from CD 2) Press F6 then Windows ask for additions drivers 3) Press "S" then select "Adaptec Embedded Serial ATA Host RAID Driver For Windows 2000/XP/2003" Windows start his installation process , the after everything mostly done and Windows go to restart computer i get blue screen with error: *** STOP: 0x0000007B (0xF78A2524, 0xC0000034, 0x00000000, 0x00000000) Can you please point me to the right things what supposed to be on my floppy? Answer Yes with the stop code error 0x0000007B meaning Windows OS does not see hard drive either wrong driver specify or drive had the problem with partition. But download Adaptec Marvell H2 SATA controller driver by click the link below and try again. https://www.supermicro.com/wdl/driver/SATA/Adaptec_Marvell_H2/Windows/8_Ports/ Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) U 7 E 4 FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 9284 Operating Systems: - Windows Server 2003 / Windows XP 01/25/10 Admin     Print Answer