Category:  Storage Keyword:  Adaptec AIC-7902 U320 SCSI 98 FAQs Found PAGE  1   2   3   4   5   6   7   8   9   10  OF 10    Question Date 1 I have X7DBE motherboard. During installing server 2012 or 2008, it cannot find driver for the SCSI Controller. Where can I download the driver? 09/20/13 2 I have old X7DVA-8 and CSE-811S-520, the backplane hard drive connector for the drive doesn’t fit/align with an U320 SCSI drive because there is no power connection for the drive and the drive's SCSI connector doesn’t align to the backplane's connector. Do I need to add something like interposer interface at the back of each drive? 11/16/12 3 When using Adaptec Storage Manager (ASM) we can access the controller information but menu settings are "greyed-out" or unavailable even using latest software and drivers, is this a OS related issue? 02/13/12 4 I have a 2U system with X7DB8 motherboard. I have the AIC-7902 Adaptec controller. I cannot find a Windows 2008r2 (64bit) driver for Windows installation. Please direct me to the right area, thank you in advance. 12/02/11 5 I would like to ask you what is the maximum number of SCSI disks and witch capacity per disk for Motherboard model X7DB8 and X7DA8? 03/14/11 6 generaly speaking should a RAID array be degraded when a system is suddenly reset or powered off ? 10/22/10 7 I'm using motherboard model X6DH8 with the Adaptec Ultra320 SCSI. I installed the Adaptec Storage Manager (ASM) under Windows Server 2003, but it did not recognize the RAID configuration due to undetected SCSI drives. How can I resolve this issue? 08/20/10 8 Using X7DA8 with Windows7/Server 2008 R2 installed on onboard SATA. OS installation runs verry slow and once installed the os takes 15 minutes to boot. The onboard floppy controller is disabled as this could cause the issue also but still the issue occurs. What can cause the problem ? 05/20/10 9 CBL-0117L-01 CBL IPASS TO 4-LANE SAS 75CM STRAIGHT to 4-lane SAS...but what kind of SAS connector? 8482 ? 8484? 8088? its not possible for me, to detect this of the picture. 03/19/10 10 I want to use AOC-LPZCR2 on my X7DB8. I am supposed to disable the HostRAID support of the onboard Adaptec AIC-7902 Controller, first. Why it won’t let me disable it? 03/15/10