Category:  Feature Keyword:  Intel Virtualization Technology (Intel VT) 48 FAQs Found PAGE  1   2   3   4   5  OF 5    Question Date 1 Our motherboard is H12SSL-i, and install two nvidia graphics cards, if we connect the card with NVLINK bridge, can it support SLI technology? 06/15/23 2 I have a computer with a X10DRL-i motherboard. I recently purchased this SATA PCI controller to virtualize/pass through my hard drives. The motherboard and software recognize it and I can use the disks. But they don't seem to be virtualizable (I can't see the controller in my list of virtualizable devices. 04/29/22 3 How to set IOMMU?  It seems that IOMMU setting doesn't seem to changed based on the VT-d setting in X11DPI-NT. 08/27/21 4 For SR-IOV and device pass-through support by using Supermicro X10/X11 single processor motherboard, X10/X11 dual processors motherboard and X11/X10 multiple processors motherboard, does any limitation or requirement to support both of features? 03/29/20 5 I have a SYS-5039MD8-H8TNR and when I enable VMD PXE boot doesn't work anymore. How can I boot from PXE when VMD is enabled ? 07/04/19 6 In light of the recent vulnerability discovery in relation to Intel Management Engine firmware codes ie. arbitrary remote exploitation, does Supermicro plan to release updates for its servers/motherboards? https://www.intel.com/content/www/us/en/architecture-and-technology/intel-amt-vulnerability-announcement.html In particular, I am after advice on how to update the Intel ME firmware for SYS-6018R-MTR. 06/08/17 7 We just bought SYS-5018A-TN4, should I change BIOS setting to enable Intel VT-X (virtualization) function? 05/05/16 8 For X9DRX+-F,  when trying to get SR-IOV to work under RedHat Linux + KVM, we are able to get most of the way there. But our guests do not actually appear to be getting the traffic. We have gotten this working on a different board with a 1 gig nic, so we are trying to isolate down the problem. We are trying to validate that the motherboard with bios 3.0 supports SR-IOV. 04/07/14 9 I have one board, X8DT6-F, and have the health status displayed incorrectly under VMware ESXi 4.0 environment. What can I do for this problem? 02/14/14 10 Can you help to confirm if MB X10SLQ supports Intel® VT or VT-d? http://www.supermicro.com/products/motherboard/core/q87/x10slq.cfm 01/09/14