BCLK Configuration Menu
Note: This menu is available for C9Z890-MW only.
External BCLK Only
Enter a value to set the CPU BCLK OC frequency. The default is 100000.
BCLK Aware Adaptive Voltage
This feature enables BCLK Aware Adaptive Voltage. When enabled, pcode wil be aware of the BCLK frequency when calculating the CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides. The options are Disabled and Enabled.
CPU BCLK PLL configuration
This feature configures the CPU BCLK PLL state. If set to PLL On, BCLK source for CPU will be from the CPU PLL. The options are PLL in HW default state, PLL ON, and PLL OFF.
SoC BCLK PLL configuration
This feature configures the SoC BCLK PLL state. If set to PLL On, BCLK source for SoC-N and for CPU (unless PCU PLL is ON) will be from the CPU PLL. The options are PLL in HW default state, PLL ON, and PLL OFF.
Compute-Die SSC Configuration (Available when “CPU BCLK PLL configuration” or “SoC BCLK PLL configuration” is set to “PLL ON”)
This feature enables the Compute-Die SSC Configuration. The options are Disabled and Enabled.
Soc-Die SSC Configuration (Available when “CPU BCLK PLL configuration” is set to “PLL ON”)
This feature enables the SoC-Die SSC Configuration. The options are Disabled and Enabled.
SSC Enable (Not available when “CPU BCLK PLL configuration” or “SoC BCLK PLL configuration” is set to “PLL ON”)
This feature enables the SSC. The options are Disabled and Enabled.
SSC Mode (Not available when “CPU BCLK PLL configuration” or “SoC BCLK PLL configuration” is set to “PLL ON”)
This feature controls the SSC mode. The options are Down and Center.
Level (Not available when “CPU BCLK PLL configuration” or “SoC BCLK PLL configuration” is set to “PLL ON”)
Enter a value to set the level. The default is 5.