Power On and BMC/BIOS Status LED Button
The Power On and BMC/BIOS Status LED button is located on pin 1 of the front control panel header located at JFP1 on the X14DBG-MAP motherboard. Momentarily contacting pin 1 of JFP1 will power on/off the system or display BMC/BIOS status.
For a detailed diagram of the X14DBG-MAP motherboard, see the layout under Quick Reference.
|
Power Button BMC/BIOS Status LED Indicator |
|
|---|---|
|
Status |
Event |
|
Green: Solid on |
System power on |
|
BMC/BIOS blinking green at 4 Hz |
BMC/BIOS checking |
|
BIOS blinking green at 4 Hz |
BIOS recovery/update in progress |
|
BMC blinking red x2 (two blinks red) at 4 Hz, one pause at 2 Hz (on-on-off-off) |
BMC recovery/update in progress |
|
BMC/BIOS blinking green at 1 Hz |
Flash not detected or golden image checking failure |