Riser Cards

Figure 39. Expansion Card Chassis Slots

This system include riser cards that provide PCIe capabilities.

PCIe Slots per Riser Card

Riser Card

Part Number

Slot

Description

Left (from rear)

 RSC-H-A6G5H 1 PCIe 5.0 x16 FHFL, (CPU2)

Right (from rear)

 RSC-H-A66G5H

2

3

PCIe 5.0 x16 FHFL, (CPU1)

PCIe 5.0 x16 FHFL, (CPU1)

Note: Full-height = 4.2", Low-profile = 2.5", Full-length = 10.5", Half-length = 6.6"

Installing Expansion Cards

The A+ Server AS -1126HS-TN includes two riser cards to support the use of expansion (add-on) cards. Before following the procedure below to install expansion cards, first turn off and remove power from the system as described in Removing Power then remove the top cover.

  1. Open any clips next to the slots and remove the PCI shield.

  2. Install the riser card to the riser bracket, if necessary.

  3. Install one or two expansion cards into the riser card. SeeInstalling M.2 SSDs.

  4. Insert the riser card bracket with the expansion cards into the chassis rear and connect cables.

  5. Close any opened clips to secure the riser card bracket.

Figure 40. Installing Expansion Cards