Releasing the Inner Rail

Each inner rail has a locking latch. This latch prevents the chassis from coming completely out of the rack when the chassis is pulled out for servicing.

To mount the rail onto the CSE-HS201-R000NFP chassis, first release the inner rail from the outer rails.

Releasing the Inner Rail from the Middle and Outer Rails

Important: Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over.

1. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.

2. Press the locking tab down to release the inner rail.

3. Pull the inner rail all the way out.