Installing the Inner Rails onto the Chassis

Begin the rack mounting procedure by installing the inner rails to the CSE-HS119-R000NP2 chassis.

  1. Confirm that the left and right inner rails have been correctly identified.

  2. Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of the chassis with the holes in the inner rail.

  3. Slide the inner rail forward toward the front of the chassis and under the hooks until the quick release bracket snaps into place, securing the rail to the chassis.

  4. Optionally, you can further secure the inner rail to the chassis with a screw.

  5. Repeat for the other inner rail.

Figure 10. Installing the Inner Rails

Important: Do not pick up the server with the front handles. They are designed to pull the system from a rack only.