IPMI Firmware Release Note
----------------------------

Filename: SMT_227.bin ver2.27 Date: 03-29-2011

1. [X8SII/X8SIE/X8SI6/X8SIT/X7SPA/X7SPE] Remove Thermal Trip event log to prevent false alarm

2. Modify default FRU
Description:Board Manufacture modified as "Supermicro" and all other entries cleared
Note:		Required OEM command raw 0x30 0x41(wait for BMC reset) to replace with the new FRU content

======================================================================================
Filename: SMT_226.bin ver2.26 Date: 03-18-2011

1. Fix Alert table blank at the webpage when enter more than 29 characters (IssueID: 95761)
   Validation:	1. Connect to IPMI by web browser,
		2. Go to Configuration -> Alerts and select one entry for modify,
		3. In the Message space, enter 30 characters and then save it and then the alert table will be blank.

2. H8SCM: Support thermal trip event logs (IssueID=26744) 

3. H8SCM, H8DCT, H8DCL: Change CPU vcore threshold to 1.448 for CPU max vcore over 1.2V (IssueID=27374) 

======================================================================================
Filename: SMT_225.bin ver2.25 Date: 03-011-2011

1. X7SPA/X7SPE: Remove thermal trip events since gpio signal is unstable

======================================================================================
Filename: SMT_224.bin ver2.24 Date: 03-07-2011

1. H8DCL: Added Chassis Intrusion status monitoring(IssueID=27711)
   Description: View chassis intrusion status at IPMI Web-> Server Health-> Sensor Reading

2. H8DCT: Fixed CPU Temp reading shows wrong information (IssueID=27791)
   Validation: Check if the reading is changed accordingly to the real temperture   

======================================================================================
Filename: SMT_223.bin ver2.23 Date: 02-23-2011

1. H8DGU-LN4, H8DGT, H8DGU, X8DTU, X8SIU, X8DTN+, X8DTU-6TF, X8DTL-i/6F, X8DTT, H8DCT, H8DCL:
   Fix CPU Temp Overheat event log missing

2. New feature: Port Configuratioin at Web GUI in Configuration category
   Description: ports of web, web SSL, IKVM server, virtual media are modifiable through web GUI

3. Fix Gateway setting can't work through different subnets 

======================================================================================
Filename: SMT_222.bin ver2.22 Date: 02-09-2011

1. Correct ID for new motherboard support X8SIL-SIOM

2. Fix cpu temp "Overheat" logged when the reading reports "High"
   Description: CPU temp Overheat should be logged as the reading reaches "Overheat"

3. For security issue, set the privilege of user ID1(Anonymous) with no access and clear jnlp kvm cache
   Validation: 	1. open IPMI web, 2 click Configuration->Users, and 3 check the privilege of user shows Reserved;
		4. launch kvm console, and 5. check if kvm jnlp file is cached after exit

======================================================================================
Filename: SMT_221.bin ver2.21 Date: 02-01-2011

1. Add new motherboard support X8SIL-SIOM
2. Add new motherboard support H8DCL

======================================================================================
Filename: SMT_V220.bin ver2.20 Date: 01-11-2011

1. H8DGG: Add slot 4 M1060/M2050/M2070/M2070Q GPU support (fan speed control, shutdown and slowdown)
2. Fix KVM slight flashes of white space while screen resolustion is below 800*640

======================================================================================
Filename: SMT_V219.bin ver2.19 Date: 12-31-2010

1. H8DCT: remove VRD1 & VRD2 sensor items.
2. Fix uninstalled fans report lower threshold events while doing system reset
3. Fix lan1 lost connection issue while doing ipmi cold reset

======================================================================================
Filename: SMT_218.bin ver2.18 Date: 12-17-2010

1. X9SCL/X9SCM: modify Fan5 to FanA
2. X7SPT/X7SPA/X7SPE: fix wrong CPU Temp reading


======================================================================================

Filename: SMT_217.bin ver2.17 Date: 12-10-2010

1. H8SCM: Removed Fan6 sensor entry

======================================================================================

Filename: SMT_216.bin ver2.16 Date: 12-06-2010

1. Add new motherboard X7SPT support

======================================================================================
Filename: SMT_215.bin ver2.15 Date: 11-24-2010

1. Bug fix on Lan1 issue

======================================================================================
Filename: SMT_213.bin ver2.13 Date: 11-10-2010

1. Add new SSID for X9SCM
2. Fix incorrect sensor readings

======================================================================================
Filename: SMT_212.bin ver2.12 Date: 10-25-2010

1. Add new motherboard X9SCL/X9SCM support
2. H8DCT: Bug fix Fan3 speed is monitored  

======================================================================================

Filename: SMT_211.bin ver2.11 Date: 10-19-2010

1. Fixed Virtual Media can't mount hidden files

Description: VM should be able to mount hidden files with a dollar sign in the share like "\share$\dvdimage.iso"

======================================================================================


Filename: SMT_210.bin ver2.10 Date: 10-13-2010	***CPU clock fixed at 180MHz***

1. CPU clock fixed at 180MHz 
2. X8DGG: Added device ID for GPU models, M2070 & M2070Q
Description: GPU temperature are readable for new models. 


======================================================================================

Filename: SMT_208.bin ver2.08 Date: 09-29-2010

1. Update on ECC error event logs
2. Add support for the BIOS to set different ACPI state (S0: system on, S1: sleep, S3: hypernate and S5: system off)
3. H8DGU(Appro): change lower thresholds of CPU Vcore & CPU DIMM VTT to fix the problem when 1.35v 8GB memory installed.
	Note: CPU Vcore:  0.736(NR), 0.744(CT), 0.752(NC) and CPU DIMM VTT: 0.584(NR), 0.592(CT), 0.6(NC).
4. Correct entity IDs in SDR
5. H8DGT/H8SGL/H8SCM/H8DGU-LN4: modify upper thresholds of NB Temp to 90(NC), 100(CT) and 110(NR) degree c
6. H8DGG: Remove sensors of GPU3 & GPU4 temp
7. Add new motherboard H8DCT support

======================================================================================

Filename: SMT_207.bin ver2.07 Date: 09-15-2010

For X8SIL/X8SIE/X8SII/X8SIA/X8SIU:
1. Adjust lower thresholds of fan speed to 215, 400 and 585(rpm)
2. Adjust upper thretholds of -12v to -10.934, -10.74 and -10.546(volts) 

======================================================================================
Filename: SMT2_206.bin ver2.06 Date: 09-08-2010

Bug fixes:
1. CPU clock follows hardware strapping 
(to fix BMC crash by DDR using Winbond instead of Hynix chip) 

======================================================================================
Filename: SMT_206.bin ver2.06 Date: 09-03-2010

Bug fixes:
1. X8SIT: Fix event log cannot catch CPU thermal trip event log 
(issueID=24349) and modify sensor system temperature to read 
from RT1: Bank 2, Reg.50
2. H8DGU-LN4+: Fix sensor CPU temperature does not show medium/high 
(IssueID=24950)
3. H8DGT-HF: Modify bootloader to fix memory corrupted at production (Ferrari Project)


======================================================================================
Filename: SMT_205.bin ver2.05 Date: 08-27-2010

Bug fixes:
1. X7SPA: Modify sensor name "Vnbcore" to "Vichcore"
2. H8DG6-F: Fix CPU temperature reports 'Low' eventhough 
CPU is overheating (issueID=24719) 
3. Fix SSH login with user/password: ADMIN/C0rbisSMAdmin 


======================================================================================
Filename: SMT_204.bin ver2.04 Date: 08-13-2010

Bug fixes:
1. X8SIL/X8SIE/X8SIA/X8SIU: Modify system temperature to read 
from RT1: Bank 2, Reg.50 (issueID=24254) 
2. Add Daylight Saving Time in web gui: Configuration->Date & Time
3. H8DGG-QF: Support Fermi GPU M2050 which can slowdown and 
shutdown GPU when overheat 


======================================================================================
Filename: SMT_203_0805.bin  ver2.03  Date: 08-05-2010

Bug fixes:
1. X8DTU-6F+: Add 100ms delay for sensor polling to fix issue
wrong sensor readings on SD3 client after overnight stress test (issueID=23803)


======================================================================================
Filename: SMT_203_0803.bin  ver2.03  Date: 08-03-2010

Bug fixes:
1. H8DG6: Remove GPU from sensor readings (issueID=24521)
2. X7SPE-HF-D525: Modify +12V sensor calculation 


=====================================================================================
Filename: SMT_202_0727.bin  ver2.02  Date: 07-27-2010

Bug fixes:
1. H8DGU-LN4F: set GPIO34 to high to fix BIOS hangs with 
post code '3E' or 'E1' (IssueID=24461)
2. Add SMTP sender's email (Web gui: Configuration -> SMTP)


=====================================================================================
Filename: SMT_201_0721.bin  ver2.01  Date: 07-21-2010

Bug fixes:
1. Fix Lan1 issue for all motherboards with Hartwell (82574) LAN chip
Description: Cannot connect to BMC use onboard LAN1 after upgrade to new FW.
Validation: With default setting "failover" or default for non-dedicate LAN MB, 
BMC connect with LAN1, SUT in OS (WS2008R2, RH5.4, or RH5.5).  Please upgrade FW 
from previous release version to this new version using web GUI and check whether 
BMC can connect again after FW flashing.


=====================================================================================
Filename: SMT_200_0720.bin  ver2.00  Date: 07-20-2010

Bug fixes:
1. X8DTU-LN4F+: Add +1.1V sensor (issueID=24334)
2. X8DTU-F: Add sensor CPU1 DIMM and CPU2 DIMM (issueID=24269)
3. X7SPA/X7SPE: Rename sensor name "1.05V" to "Vnbcore" to sync with BIOS
(issueID=23092)

