================================================================================
Supermicro System BMC Update Package Operation Instructions
================================================================================

Please read this document before performing the system BMC update.  
Please verify that your system meets the requirments.

********************************************************************************
This update package includes the following system software updates & utilities:

--- BMC image ---

  BMC          - BMC_X14AST2600-ROT20-7601MS_20240913_01.00.21.01_STDsp.bin              (REV 1.00.21)

--- BMC Update Tools ---

BMC flash.nsh                                                               (Update Script)
SAA.smc                                                                         (SAA for UEFI)
saa_activate_RHI.nsh                                                    (Activate RHI)
saa_deactivate_RHI.nsh                                               (Deactivate RHI)
UEFI_SAA_UserGuide.pdf                                            (SAA User Guide)
X14_BMC_Upgrade_README.txt                               (SAA Update BMC Readme file) 
X14DBG-GD_BMC_Package_Readme.txt                  (BMC Package Readme file) 


--- Supported Products ---

  Supermicro Motherboards:
  MBD-X14DBM-SP
  
*************************************************************************************
                       SYSTEM HARDWARE and FIRMWARE REQUIREMENTS
*************************************************************************************

<NONE>


*************************************************************************************
                                         Warning
*************************************************************************************

1. Do not interrupt, reboot or remove power from your system during the update.
   Doing so may cause the system failure.

2. If the software update fails, you may contact our RMA Department to have the BIOS/
   IPMI firmware chip reprogrammed.  This will require shipping the board to Supermicro
   for repair.  Please submit your RMA request at:
   http://www.supermicro.com/support/rma/.
